System Installed
16kWh LiFePO₄ battery
Client
Mr. & Mrs. Oloye
Akute
What they say
“The 16kWh battery has been outstanding, uninterrupted power day and night.”
Energy Solutions
Power systems engineered around how you actually use energy.
Solar, LiFePO₄ battery, and inverter systems, assessed, designed, assembled, installed, and supported by engineers. Not shelf-picked. Engineered.
The System
One system, four engineered parts.
We work with the whole chain, not a single box. Every part is selected, sized, and integrated for the others.
Solar generation
Panels sized to your site and sun exposure
LiFePO₄ storage
Battery packs designed and assembled in-house
Inverter conversion
Matched to your loads and programming modes
Your loads
The real equipment the system must carry
01
Solar Systems
Design · Installation · Integration · Maintenance
- Site assessment and solar design for homes, businesses, and industries
- Grid-tied, off-grid, and hybrid configurations
- Commissioning with a handover walkthrough
- Troubleshooting, repair, and upgrades of existing systems
02
Battery Systems
LiFePO₄ · Assembly · Integration · Installation
- Custom LiFePO₄ battery system design for your loads
- In-house battery pack assembly with BMS integration
- Load testing before installation
- Battery installation and integration with inverters
03
Inverter Systems
Installation · Programming · Maintenance
- Inverter selection matched to your load profile
- Professional installation and configuration
- Programming for hybrid, off-grid, and grid-tie modes
- Inverter maintenance and fault diagnosis
04
Energy Assessment
Loads · System Design · Backup Consultation
- Load measurement and honest feasibility advice
- Power backup consultation, solar, battery, inverter, or generator plans
- Custom power solutions for unusual requirements
- A written, itemised proposal before any equipment is ordered
The Problem
The problems we engineer against, every day.
Most power problems are not a lack of equipment, they are a lack of engineering. Wrong sizing. Wrong integration. No commissioning. No support after handover.
We start by listening to what actually happens at your site, then we design against the failure, not against a brochure.
01
Unreliable power
Frequent outages force you to plan life around the grid, or around generator runs.
02
Poorly designed systems
Systems sized without measuring your real loads fail under pressure, undervoltage, overload, undersized storage.
03
Existing systems underperforming
A solar, battery, or inverter system that used to work but no longer delivers, or was never commissioned properly.
04
Rising power costs
Generator fuel and grid bills keep climbing, and nobody has measured what you actually consume.
Engineering Approach
We don’t start with a product. We start with the requirement.
Every engagement follows the same engineering sequence, from the first site visit to long after handover.
- 01
Assess
We study the site, measure the real loads, and understand how and when you use power.
- 02
Design
The system is designed around actual usage, with a clear, itemised proposal before anything is ordered.
- 03
Assemble
Where applicable, battery packs are assembled and prepared in-house, LiFePO₄ cells, BMS integration, load testing.
- 04
Install
Panels, batteries, and inverters are installed by our own technicians and integrated properly.
- 05
Commission
Every circuit is tested and configured, and you receive a handover walkthrough of how the system works.
- 06
Support
Maintenance, troubleshooting, and upgrades, we stay with the system after handover.
Engineering-led · In-house assembly · Commissioned before handover
Signature Capability
LiFePO₄ battery engineering, designed, assembled, and tested in-house.
Most installers fit batteries made by other companies. We design and assemble our own LiFePO₄ packs, sized to your loads, matched to your inverter, and load-tested before they reach your site.
Build Sequence, Lithium Battery Systems
- 01
Design
A LiFePO₄ battery sized and specified for your loads and inverter.
- 02
Assemble
Cells configured and packs assembled in-house, with BMS integration.
- 03
Test
Packs are load-tested before they leave the workshop.
- 04
Integrate
Installed and wired into the complete system, solar, inverter, and loads.
- 05
Support
Maintenance, diagnostics, and upgrades for the life of the battery.
LiFePO₄ cells · BMS integration · Load-tested · Custom sized
Which System Do I Need?
Find your starting point.
Match your situation below. This is honest guidance, the real sizing happens in the assessment, where your actual loads are measured.
01
“I need power from the sun during the day”
A solar system, panels, mounting, and integration designed and installed for your site.
02
“I need backup power at night or during outages”
A battery + inverter combination, storage sized to carry your priority loads through the night.
03
“I already have solar but need more storage”
A battery design, assembly, and integration project, extending what you already have.
04
“My existing system isn't performing correctly”
Troubleshooting, diagnosis, repair, and upgrades, including systems installed by other companies.
05
“I don't know what system I need”
An energy assessment, we measure your loads and recommend what fits, honestly.
Not sure where you fit?
Every project starts with a free energy assessment, no obligation.
Real Project Record
Systems in the field, with the clients who run them.
Real configurations from real installations, with the words of the people who use them. No invented numbers, these systems are in service.
System Installed
Client
What they say
System Installed
6.2kVA inverter + 16kWh battery + 12 × 450W solar
Client
Mr. Alonge
Ikorodu
What they say
“Our home runs smoothly even during long power outages.”
System Installed
8kWh battery + 4.2kVA inverter + 6 × 450W solar
Client
Mrs. Folashade
Home & Office
What they say
“Reliable, efficient, and completely worth the investment.”
System Installed
6.2kVA inverter + 16kWh battery + 12 × 450W solar
Client
Mrs. Blessing
Ibadan
What they say
“The system powers our dental clinic and all its equipment reliably.”
Client references shared with permission from our project record. Alongside these we have delivered and support the configurations: 16kWh and 8kWh LiFePO₄ systems with 4.2kVA and 6.2kVA inverters, plus 450W solar arrays.
More of our workWho We Design For
Homes, businesses, and industry.
The engineering is the same, the systems are not. We design for the site, its loads, and the way it operates, whatever its size.
01
Residential
Homes and estates
- Whole-home hybrid systems and quiet backup
- Systems that grow with you, panels and storage later
- Installation planned around your daily life
02
Commercial
Offices, shops, hotels, businesses, and facilities
- Backup and full systems for business continuity
- Load engineering across working hours
- Professional documentation for procurement
03
Industrial
Factories and larger operational environments
- Power systems engineered to operational loads
- Earthing, distribution, and integration handled by engineers
- Systems sized for equipment, not guesses
Engineer-led design and installation across Abuja and Lagos, backed by 13+ years of combined hands-on experience in battery design, solar and inverter systems, and power electronics.
Maintenance & Support
Installation is the start of the relationship, not the end.
Systems degrade when nobody owns them. We stay with the systems we build, and we rescue systems other companies left behind.
- Install
- Commission
- Maintain
- Upgrade
- Support
What we actually do
- Troubleshooting and fault diagnosis, including systems installed by other companies
- Repairs and component replacement
- Preventive maintenance visits and scheduled plans
- System upgrades, more panels, more storage, reconfiguration
- Inverter programming and configuration
- Battery system maintenance and integration support
The Energy Assessment
What to expect, professional assessment, not a sales pitch
- 01
Understand your requirements
Session with you about what must keep running, and when.
- 02
Identify the loads
We measure what actually consumes power at your site.
- 03
Evaluate existing systems
If you already have equipment, we assess its true condition.
- 04
Determine the requirement
We size generation, storage, and inverter requirements to match.
- 05
Recommend the solution
A clear, itemised proposal, before any equipment is ordered.
Talk to an Engineer
Initial consultation and site assessment are free and without obligation, you receive a written, itemised proposal before any equipment is ordered.
Future Direction
Where our research is headed, not what we sell today.
Our current capability is the energy systems on this page. These areas are development directions we are exploring, they become services only when we can deliver them properly.
- Smart energy management
- AI-powered energy management
- EV & e-bike technologies
- Energy manufacturing
Energy Systems, Questions
Asked by people about to make the same decision you are.
Honest answers, drawn from how we actually work, no marketing fluff.
Still have questions? Contact our engineering team. We are happy to talk it through.
Start the Conversation
Talk to an Engineer.
Free consultation and site assessment, no obligation. Tell us about your power, electrical, or automation problem, and we will tell you honestly what it takes to fix it.
Free consultation · Written proposals · After-sales support